1.
2.
3.
1.
2.
3.
The device supports 802.3af/at PoE from Ethernet 1 - 16. You can power Mikrotik devices which supports powering through Ethernet. The power delivered
through the PoE port will depend on the incoming to the device.
Max PoE-out on low (<30 V) voltage 5.6 A (2.8 A per 8port group, max 1.1 A per port).
Max PoE-out on high (>30 V) voltage 2.8 A (1.4 A per 8port group, max 0.6 A per port).
Connecting to a PoE Adapter, only to deliver power to other devices:
Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
Connect an Ethernet cable from your local network (LAN) to the PoE adapter.
Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Bottom Lid
Bottom lid is secured in place with the captive screw, it can be unscrewed by hand, but do not remove the screw completely.
Pull the cover towards.
Lift to access Ethernet ports.
Mounting
The device can be mounted in several ways: pole, wall, or ceiling. The package also includes a drill hole template with detailed mounting instructions, to
help you with the drill hole marking. The device has eight mounting points for versatility use zip ties or steel clamps for mounting on the pole.
When using both the high and low Voltage adapters, the netPower will automatically choose the correct PoE standard and Voltage, based on
the devices you connect to each port. This can also be specified manually.
The IP rating scale for this device is IP54. When mounting outdoors, please ensure that any cable openings are directed downwards.
