3
mikrolift
LiftCell v1.4
If the
yellow led
waiting for a long time and then
blinking twice
(2 sec. Off
then blinking twice respectively), there is a connection error. SIM card may
be off or has a very low connection. Try to make a call by putting SIM card on
a phone or connect LiftCell to a computer through RS232 port and check its
connection power.
If the
yellow led
blinking fast
, (250msec. on, 250msec, off), means there is no
number that registered on the device.
4.
SMS Configurations
Using the commands below, it can be arranged which number will be called (ATA) or which
number will receive the address where the elevator is located (BUL). SMS can be sent whether
the device is working or not. Only one command should be sent in one message.
Examples of SMS commands are given below:
a.
Number Assignment
b.
Delete Number
c.
Define Address Information
ATA 05351112233
ATA +905351112233
SIL +905351112233
SIL 5351112233
SIL HEPSI
BUL 05351112233 Ferhatpasa Istanbul
BUL SIL
Even without 0(zero) on the beginning it will find and delete
Delete all numbers
If IN7 input is set, it will send this number to that address
Delete address and phone information (Only one can be saved)