Distributor of MikroElektronika: Excellent Integrated System Limited
Datasheet of MIKROE-701 - BOARD UNI-DS6 DEV SYSTEM
Contact us: [email protected] Website: www.integrated-circuit.com
8
UNI-DS6
MikroElektronika
page
3. Placing mikroBoard
The UNI-DS6 development system is designed for usage with various mikroBoards� All the mikroBoards are placed in
a universal mikroBoard socket , Figure 3-1� This socket consists of two 2x40 female headers� To place mikroBoard in
this socket follow the steps below:
Figure 3-1
: mikroBoard placed in socket
STEP 1
:
Make sure that all header pins on mikroBoard
are aligned with the mikroBoard socket
STEP 2
:
Apply pressure on mikroBoard
edges until it fully fits the socket
9 / 25
9 / 25
