7
UNI-DS3 Development System
MikroElektronika
page
3ODFLQJ0&8&DUG
The
UNI-DS3
development system provides a DIMM-168P socket to place an MCU card into. All MCU cards are placed in the same
PDQQHU,WLVVKRZQLQ¿JXUHVEHORZKRZWRSODFHWKH
UNI-DS3
card with a PIC microcontroller in TQFP80 package. Any card intended
to be used on the
UNI-DS3
development system may be placed instead of this one.
Extraction lever used
WR ¿[ 0&8 FDUG LQ WKH
‘closed’ position
Extraction lever used
WR ¿[ 0&8 FDUG LQ WKH
‘open’ position
The
UNI-DS3
development system may be delivered with MCU cards with
one of the following microcontroller families: PIC, dsPIC, AVR, 8051, ARM
and PSoC. Detailed descriptions of MCU cards are provided at the end
of this manual.
1
A
B
Open extraction levers A and B
2
Place the MCU card into the DIMM-168P socket
3
Push the MCU card down gently into the DIMM-168P socket and
lift extraction levers slowly at the same time
4
Close the extraction levers when the MCU card is properly placed
into the socket
)LJXUH
: Schematic of the DIMM-168P socket’s pinout
