Distributor of MikroElektronika: Excellent Integrated System Limited
Datasheet of MIKROE-766 - BOARD DEVELOPMENT READY PIC
Contact us: [email protected] Website: www.integrated-circuit.com
Page 8
1. Power supply
Ready for PIC
®
board can be powered in three different ways: via USB connector (CN1), via adapter connector using external adapters (CN2) or
via additional screw terminals (CN46). The USB connection can provide up to 500mA of current which is more than enough for the operation
of every on-board module and the microcontroller as well. If you decide to use external power supply, voltage values must be within 7-23V AC
or 9-32V DC range. Power LED ON (GREEN) indicates the presence of a power supply. Use only one of the suggested methods for powering
the board. If you use an MCU with a 5V power supply place jumper J1 in the 5V position. Otherwise, it should be placed in the 3.3V position.
Figure 1-2:
AC/DC adapter power supply
Figure 1-3:
screw terminals power supply
Figure 1-1:
USB power supply
9 / 29
9 / 29
