Page 12
Page 13
Programming with mikroBootloader
You can program the microcontroller with bootloader which is
preprogrammed into the device by default. To transfer .hex file
from a PC to MCU you need bootloader software (
mikroBootloader
USB HID
) which can be downloaded from:
After software is downloaded unzip it to desired location and
start mikroBootloader USB HID software.
http://www.mikroe.com/eng/downloads/get/1752/
mikrobootloader_lm3s9b95_v160.zip
Figure 4-2: mikroBootloader USB HID
step 1 – Connecting mikromedia
01
02
Connect mikromedia board with a PC via USB cable and USB
icon will turn red.
Click the
Connect button
whitin 5s, otherwise existing
microcontroller program will execute.
01
02
