8
MikroElektronika
page
EasyPIC6 Development System
2Q%RDUG86%3,&ÀDVK3URJUDPPHU
The
3,&ÀDVK
programmer is an obligatory tool when working with microcontrollers. The EasyPIC6 has an on-board
3,&ÀDVK
programmer
with mikroICD support which allows you to establish a connection between the microcontroller and your PC. Use the
3,&ÀDVK
programmer to
ORDGD+(;¿OHLQWRWKHPLFURFRQWUROOHU)LJXUHVKRZVWKHFRQQHFWLRQEHWZHHQDFRPSLOHU
3,&ÀDVK
programmer and microcontroller.
Jumpers J8 and J9 used for selecting socket
with the microcontroller
)LJXUH3,&ÀDVKZLWKPLNUR,&'
programmer
Jumper J7 used for selecting the MCLR pin’s
function
127(
For more information on the
3,&ÀDVK
programmer refer to the relevant manual provided in the EasyPIC6 development system package.
The
3,&ÀDVK
programmer
window contains several options
for microcontroller settings. A
number of buttons which will
make the programming process
easier are provided on the right
side of the window. There is
also an option at the bottom of
the window which will enable
you to monitor the programming
progress.
Write a code in some of PIC compilers, generate
DKH[¿OHDQGWKHRQERDUGSURJUDPPHUZLOOWDNH
care of loading data into the microcontroller.
3
Compiling
program
)LJXUH
The principle of programmer’s operation
Write a program in some of PIC
FRPSLOHUVDQGJH(;¿OH
Use the
3,&ÀDVK
programmer to
select an appropriate microcontroller
DQGWR(;¿OH
Click the
:ULWH
button to load the
program into the microcontroller.
2
1
2
1
3
Jumpers J10 used for connecting PGM line
Executing code in binary
and hexadecimal format
