Page 14
The microcontroller can be programmed with external mikroProg
™
for STM32 programmer and mikroProg Suite
™
for ARM
®
software.
The external programmer is connected to the development system via 2x5 JTAG connector soldered on the CN2 connector pads,
Figure 4-9. mikroProg
™
is a fast USB 2.0 programmer with hardware debugger support. It supports STM32 M3 and M4 devices from
STMicroelectronics. Outstanding performance, easy operation and elegant design are its key features.
Programming with mikroProg
™
programmer
Figure 4-9: mikroProg
™
connector
