Page 16
A standalone programming software utility called mikroProg Suite
™
for FT90x
is available as an
alternative to programming the MCU directly from the FT90x compiler. This software is used for
programming of all supported FT90x microcontrollers. The software has an intuitive interface and
SingleClick
™
programming technology. To begin, first locate the installation archive on our web site:
www.mikroe.com/downloads/get/2215/mikroprog_suite_ft90x_v100.zip
After downloading, extract the package and double click the executable setup file, to start the installation.
Figure 3-10:
mikroProg Suite
™
for
FT90x window
Quick guide
mikroProg Suite
™
for FT90x software
1
2
3
4
Click the Detect MCU button in order to recognize the device ID.
Click the Read button to read the entire microcontroller memory.
You can click the Save button to save it to the target HEX file.
If you want to write the HEX file into the microcontroller, first
make sure to load the target HEX file using the Load button. Then
click the Write button to begin programming.
Click the Erase button to clear the microcontroller memory.
