Page 11
1
3.1 Programming with mikroBootloader
You can program the microcontroller with a
bootloader which is preprogrammed by default.
To transfer .hex file from a PC to MCU you need
bootloader software (mikroBootloader USB HID)
which can be downloaded from:
www.mikroe.com/downloads/get/2230/
clicker_2_ft90x_bootloader.zip
After the mikroBootloader software is downloaded,
unzip it to desired location and start it.
Figure 3-2: USB HID mikroBootloader window
step 1 – Connecting clicker 2 for FT90x
To start, connect the USB cable, or if already connected press the Reset button
on your clicker 2 for FT90x. Click the Connect button within 5s to enter the
bootloader mode, otherwise existing microcontroller program will execute.
clicker_2_ft90x_bootloader.zip
WinRAR ZIP archive
clicker_2_ft90x_bootloader
File folder
Software
File folder
mikroBootloader USB HID.exe
Bootloader tool for mikroElektron...
mikroElektronika
Clicker 2 FT90x USB HID Bootloader
v1.300.hex
HEX File
Firmware
File folder
1
