Mikroe CODEGRIP UNIVERSAL, User Manual

Page: 30 / 46

P A G E 30
U N I C O D E G R I P U S E R M A N U A L
Scan List tab
To start the scanning process click on the SCAN DEVICES button. All
detected CODEGRIP devices will be visible in the Scan List . Every item
listed, displays some general information about the device itself, such as
the
Device Name , Serial number , and IP address .
Depending on the available interface (USB or WiFi), one or two link buttons
will appear on each CODEGRIP device item. These buttons are used to
create or close the link between the specific device and CODEGRIP Suite.
Device Name
Every CODEGRIP device has its own device name. This allows the user to
clearly identify the specific CODEGRIP device, especially when there is more
than one device connected to a host PC. The user can modify the device
name.
Serial number
This is a unique serial number associated with the CODEGRIP device. Every
device has its own serial number, which is used for the identification. This
information cannot be modified by the user.
5.2 CODEGRIP
The CODEGRIP Menu button contains Menu items related to the detection
and setup of the CODEGRIP device.
5.2.1 Scanning
The Scanning Menu item contains tools for detecting CODEGRIP devices.
This Menu item also provides controls for link management. There are two
tabs displayed in the Menu item section, Scan List tab and Options tab .
IP address
If the CODEGRIP device is detected over the WiFi network, its IP address will
be displayed. Otherwise, this field will display the message “
None ”.
USB LINK button
This button is used to create or destroy the USB link to a specific CODEGRIP device.
SCANNING