Mikroe CODEGRIP UNIVERSAL, User Manual

Page: 32 / 46

P A G E 32
U N I C O D E G R I P U S E R M A N U A L
CONFIGURA
TION
Device General tab
This tab contains some general information about the linked CODEGRIP
device.
Device Name
The name of the currently linked CODEGRIP device can be set here, allowing it to
be easily identified by the user. It can consist of up to 32 printable ASCII characters.
Manufacturer Name
This field displays the name of the manufacturer (MikroElektronika). This
field is programmed during the production phase and cannot be changed.
Serial Number
This field contains a unique serial number, associated with the specific
CODEGRIP device. This field is programmed during the production phase and
cannot be changed.
5.2.2 Configuration
When Configuration Menu item is clicked, a set of four tabs will be displayed
in the Menu item section Device General, WiFi General, WiFi Mode , and
Licenses , each with its own set of options. On the bottom of the Menu item
section, there are two buttons:
RELOAD CONFIGURATION button will read back the configuration values
from the CODEGRIP device, refreshing the content of CODEGRIP Suite.
STORE CONFIGURATION button will upload the current configuration to the
linked CODEGRIP device and perform the reset, applying new configuration
settings to the CODEGRIP device.
Hardware version
Hardware version number represents the hardware revision of the
CODEGRIP device. This field is programmed during the production phase
and cannot be changed.
Firmware version
Firmware version number represents the current firmware revision of the
linked CODEGRIP device.