P A G E 8
CLICKER 4 for TMPM4K
U S E R M A N U A L
The microcontroller can be programmed with an
external programmer and supported software. The
external programmer is connected to the development
board via a 2x5 JTAG/SWD connector soldered on the
J2 connector pads.
2.2 Programming with an external programmer
Before usage, please check if the programmer pinout and
the 2x5 pin header pinout are compatible. Based on the
used programmer/debugger tool pinout, a coresponding
addapter might be needed.
NOTE
CLICKER 4 for TMPM4K
U S E R M A N U A L
MCU PROGRAMMING
Figure 3: Click
er 4 f
ot TMPM4K with programmat
or
