P A G E 7
CLICKER 4 for TMPM4K
U S E R M A N U A L
MCU PROGRAMMING
2. MCU Programming
2.1 Programming with on-board debug unit
Clicker 4 for TMPM4K uses Toshiba’s TMPM067FWQG as
the on-board Debug Unit. It is compliant with an on-board
emulator standard called CMSIS-DAP.
CMSIS-DAP is the interface firmware for a Debug Unit that
connects the Debug Port to USB. Debuggers, which execute
on a host computer, connect via USB to the Debug Unit and to
the Device that runs the application software. The Debug Unit
connects via JTAG or SW to the target Device. Once Clicker
4 is powered up, and PWR/DBG connector is connected to
the PC, it takes a few seconds for the on-board Debug Unit
to initialize. After the on-board CMSIS-DAP is initialized, two
LEDs RUN and COM blink one time.
