MIKOTERM TK-24 12kW, Instructions For Installation, Use And Maintenance Manual

Page: 3 / 38

Explanation of symbols and instruction for safe work
1.
Explanation of symbols and instruction for safe work
1.1 Explanation of symbols 1.2 Instruction for safe work
Warnings
The warning triangle with grey
background and framed means a warning
within the given text
Danger of electric power shock is marked
with the thunderbolt symbol in warning
triangle
Signal words at the beginning of a safety notification means
modus and seriousness of consequences that can occur if
not apply measures for preventing danger.
•
NOTE means possible minor material damage.
•
CAUTION means possible minor to middle injuries.
•
WARNING means possible hard injuries.
•
DANGER means possible hard injuries.
Important information
Important information meaning danger for people and
things, are marked by symbol illustrated in the following
text.
It is framed by lines above and below text.
Other symbols
Symbol Meaning
 
Step of action
 
Direction to other points in document or other
documents
•
Enumeration/ Enter from list
–
Enumeration
/Enter from list (2.)
Table 1
General safety instructions
Failure to respect safety instructions can lead to
heavy injuries
– and to the lethal outcomes,
material and environmental damage.

Professional inspection of electric installations should
be secured before installing this device.

All electric works should be done by person authorised for
such works according to the relevant regulations.

Make sure that commissioning, maintenance and
repairs are done only by the competent service.

Make sure you have provided technical handover
of installations in accordance with relevant
regulations.
Danger in case of emergency, for example in case
of fire, due to disrespect of own security.

Never expose to life threat. Own security is always priority.
Damage due to wrong handling
Wrong handling can lead to injuries and/or installation
damage.

Only persons authorised to work correctly with device can
have access to the device

Only authorised service must perform
commissioning, maintenance and repair of device
with proper certification for electric works.
Installation and commissioning

Only authorised service can place the device.

Boiler can be started only if installation is with proper pressure
level with neat working pressure. Safety valves must not turn
on in order to avoid damage caused by too high pressure.
During heating water can leak on safety valve within the hot
water circuit and hot water pipes.

Install this device only in a room safe from freezing.

do not store or dispose combustible materials or
liquids near this device.

Keep safe distance according to valid regulations.
