10 Pump Wilo-Para MSL/6-43/SC
Const speed:
The pump works without electronic
regulation, with a choice of power from I to III (same as
with conventional 3-speed pumps). It is factory set to be
in this mode at the first turn on, set to 3rd gear
ΔP – v:
The pump works with electronic regulation in a
variable ΔP mode. This mode is suitable for heating
systems where there is a change in pressure, e.g. a
radiator (or floor heating system) with thermal head
valves
ΔP – c:
The pump operates with electronic regulation, in
a constant ΔP mode. This mode is suitable for systems
where there is no significant change in pressure, e.g. a
radiator system without a valve with thermal head
Pump Wilo-Para MSL/6-43/SC
1. Composite OEM pump housing
2. Pump inlet MS ¾ 'SN
3. Pump output terminal composite ¾ '' SN
4. Automatic air vent
5. Safety valve 3bar
6. Pressure sensor
7. Pump head with electronics
8. Pump Mode Selector Button
9. Drain faucet
Wilo Para MSL / 6-43 / SC is a circulating pump for heating
systems, heating systems for family houses and other similar
systems. The most important characteristics of this pump are:
•
Maximum flow rate: 2.1 m3 / h
•
Maximum water column height: 6.8 m
•
Maximum media temperature (at ambient temperature
58 ° C): 100 ° C
•
Maximum glycol concentration in the system: 50%
•
Minimum and maximum rotor speed: 2430 ~ 4300 rpm
•
Minimum and maximum pump power: 3 W ~ 43W
•
Minimum and maximum pump current (230V AC): 0.04
4 0.44A
•
Energy Efficiency Index (EEI): ≤ 0.2
(This energy efficiency index in practice means that the
Wilo-Para pump consumes up to 80% less electricity
compared to earlier versions of the same class pumps
that did not have electronic power regulation).
