15
Fig.14
Fig.15
Secondary element
INTIAL OIL CHANGE:
After 50 hours of operation.
Fig.11
Oil gauge
Oil inlet plug
Drain plug
SECOUND OIL CHANGE OR LATER:
Every 200 hours of operation.
Change the main body oil.
Remove the drain plug on the foot plate (Fig.
11) and drain the oil. Refill with approximately
820 cc of engine oil of API service categories
SE or higher, SAE 10W-30. The oil level should
be the halfway point of the oil gauge.
Change the engine oil.
Remove the drain plug (Fig. 12) and drain the
oil. Refill with approximately 800 cc of engine
oil of API service categories CD or higher, SAE
10W-30.
Please refer to the engine operation manual
for details of change the engine oil.
Cleaning the air cleaner
Remove the upper air cleaner cover on the
main body. And then remove the air cleaner
cover on the air cleaner assembly.
Primary element(clean every 80 to 100 hours)
If the primary element (Fig. 13) is dirty,
wash it with gasoline or kerosene. Then
dip it in engine oil (SAE 10W-30) and
wring it so that 25 to 30 cc of engine oil
remains on it.
●
●
3.
●
Fig.12
Drain plug
INTIAL OIL CHANGE:
After 50 hours of operation.
SECOUND OIL CHANGE OR LATER:
Every 200 hours of operation.
Secondary element(clean every 100 to
150 hours)
If the secondary element (Fig. 14) under the
primary element is dirty, wash it with neutral
detergent and dry it well. Then reuse it. (Fig.15)
Cleaning the oil filter of engine
Clean the oil filter of engine every oil change.
(Fig. 16)
●
4.
Primary element
Fig.13
Fig.16
Oil filter
