15
㻲㼕㼓㻚㻝㻣
Element
Eight hours service
This rammer has grease nipple of four points and
should be greased using the grease gun.
If inferior type grease is used, the grease could
become too thick or too thin due to change in
temperature and improper lubrication may result.
(Fig.16)
Grease type: SHELL STAMINA EP-2 or equivalent
(High temperature grease)
Fifty hours service
Clean the fuel cock. Adjust spark plug gap to
0.02-0.03 inch (0.6-0.7mm). This unit has
electronic ignition which requires no adjustments.
Air cleaner (Engine) cleaning
Remove the element from the air cleaner
(engine) and Tap the paper air filter element
several times on a hard surface to remove dirt, or
blow compressed air through the filter element
from the air cleaner case side. (Fig.17)
2.
䖃
3.
䖃
One-hundred fifty hours service
Air cleaner (Upper)
Remove the element from the air cleaner (upper
part) and wash it with
kerosene
. Impregnate the
engine oil of 7 to 9 cc from the lower element
(yellow) and squeeze lightly to assemble well to
the upper element (gray), then install it.(Fig.18)
Two-hundred hours service
Air cleaner (Engine) replace
Replace the element(engine).(Fig.17)
2 years service
Fuel hose
P l e a s e m a k e s u r e t h a t t h e f u e l h o s e i s
damagedand the mounting part is not loose.
Even if there is no abnormality at inspection,
please replace the fuel hose in 2 years.
Intake pipe
Please make sure that the intake pipe is
damagedand the mounting part is not loose.
Even if there is no abnormality at inspection,
please replace the intake pipe in 2 years.
Precautions for washing machine
When washing with a high pressure steam
machine, do not put water directly on the air
cleaner, carburetor, muffler, tank cap. There is a
fear of engine trouble.
4.
䖃
㻡㻚
䖃
㻢㻚
䖃
䖃
㻣㻚
㻲㼕㼓㻚㻝㻢
Grease nipple
Grease nipple
㻲㼕㼓㻚㻝㻤
Element
Air cleaner
(Upper)
Grip bolt
For details about the check and maintenance
of the engine, please refer to the attached
engine operation manual.
CAUTION
䟿
