background image

2

3. Warning labels

4. Precautions for safety

The triangle shaped       marks used in this manual and on the decals stuck on the main 

body indicate common hazards. Be sure to read and observe the cautions described.

Warning labels indicating hazards to humans and to equipment.

DANGER:

WARNING:

CAUTION:

Denotes an extreme hazard. It calls attention to a procedure, practice, condition or the like, 

which, if not correctly performed or adhered to, is likely to result in serious injury or death.

Denotes a hazard. It calls attention to a procedure, practice, condition or the like, which, if 

not correctly performed or adhered to, could result in serious injury or death.

Denotes a hazard. It calls attention to a procedure, practice, condition or the like, which, if 

not correctly performed or adhered to, could result in injury to people and may damage or 

destroy the product.

Precautions (without a triangular mark): Failure to follow the instructions may result in damage to property.

4.1 General precautions WARNING

Do not work in the following conditions.

If you do not feel well due to overwork or illness.

If you are taking any medicine.

If you are under the influence of alcohol.

WARNING:

CAUTION:

Read this instruction manual carefully and handle the machine as 

described so that you can work safely.

For details about the engine, refer the separate instruction manual for 

the engine.

Make sure you thoroughly understand the construction and operation 

of the machine.

Please execute former check to operate, periodic self inspection, 

specification self inspection surely.

To work safely, always wear protective clothing (helmet, safety 

glasses, safety shoes, ear plugs etc.) and appropriate work clothes.

Please wear Hearing protector ( noise protective equipment of ear 

muff or ear stoppers) by all means.

Always check the machine to make sure that it is normal before 

starting operation.

The decals on the machine body (operating methods, warning decals, 

etc.) are very important to ensure safety. Keep the machine body 

clean so that they can be read at all times. If any decal cannot be 

read, replace it with a new one.

It is very dangerous if children come into contact with the machine. 

Take the utmost care about how and where the machine is stored.

Before performing any maintenance, be sure to turn the engine off.

Mikasa does not accept any liability for accidents or problems caused 

as a result of not using genuine Mikasa parts or if the machine has 

been modified.

4.2 Precautions when adding fuel

DANGER:

When adding fuel.

Be sure to work in a well ventilated location.

Be sure to turn the engine off and wait until it has cooled down.

Take the machine to a clear flat location without any combustibles 

nearby. Be careful not to spill any fuel. If you do spill some 

gasoline, wipe it all up.

Do not allow any open flames nearby while adding fuel. (In 

particular, smoking while adding fuel is strictly prohibited.)

Adding fuel until it comes too close to the top of the inlet may cause 

the fuel to overflow. That is dangerous. Follow the instructions in the 

engine manual about the specified fuel level.

When through adding fuel, tighten the tank cap securely. 

Summary of Contents for MRH-600DSA-DX





























Reviews: