background image

4-5

Labeling position



䕿䚷






䕿䚷

4-6

Descriptions of symbols used on safety label

䚷䚷

 


䚷䚷

 

䐡䚷
䐢䚷

䚷䚷

 

Fig.No.

䚷㻌㻌㻌

Part No.

䚷䚷䚷䚷

   P a r t   n a m e

㻌䚷䚷䚷䚷䚷䚷

                Remark

   23  

䚷㻌

9201-10850

㻌㻌

Nameplate,  Product No./MGX

㻌㻌㻌㻌㻌㻌㻌㻌㻌㻌㻌㻌㻌㻌㻌㻌

NP-1085

   26  

䚷㻌

9201-10460  Nameplate, Combination of caution labels

㻌㻌㻌

NP-1046

   50  

䚷㻌

9201-10550  Nameplate, Double insulation                        NP-1055 No.50

No.26

No.23

No.23

No.26

No.50

MGX  2 8 0 W 

100V

㹼㹆㹸 㸿

㹔㹎㹋

No 

Made  In  Japan 

NP

㸫㸯㸮

P S 

WARNING

DANGER

If you notice abnormal condition of the machine or 

abnormal noise while using the machine, turn off the 

switch immediately to stop the machine. Then contact the 

sales store or the rental store to ask for inspection and 

repair. Electric leak or fire accident might occur.

䕿䚷

CAUTION

When not used, always turn off the switch.

Do not use the machine with abnormal posture.

Always secure stable footing and keep good balance.

WARNING

When working at high location, make sure that there is no 

one underneath. For safe work, use a safety wire to 

prevent the fall of the machine.

WARNING

Do not let children come near the machine.

Anyone other than the workers should not be allowed to touch the 

high frequency vibrator and extension cord.

Do not allow anyone other than the workers to come near the 

work area.

4-4  Cautions for maintenance

Before inspection and maintenance work, always turn off 

the switch and unplug from the power outlet.

Do maintenance work carefully.

Check the cord regularly, and if damage is detected, contact the 

sales store for repair.

If repair is done by someone without proper repair knowledge or 

skill, the machine will not function properly, and even accident and 

injury might occur.

When using a connection (extension) cord, check it regularly and if 

damage is detected, replace it with a new one.

Keep the holding part dry and clean all the time. Keep the holding 

part free of oil and grease.

Double Insulation

Read the instruction manual carefully.

Do not use in rain (to avoid electrification, short circuit).

Wear ear and eye protection gear

Double insulation

Read the instruction manual before use, and operate the machine safely.

Do not use the machine in rain.

Do not wash with water.

Do not leave the machine in rain without covering.

Do not transport the machine in rain without covering.

Double insulation structure.  Grounding not required.

Summary of Contents for MGX-23













Reviews: