Mikado LOGO 400, Manual

Page: 19 / 54

Manual LOGO 400 Page 19 ©Mikado Modellhubschrauber
8x M3 x12 #1954
2x 27,5 mm
#2370
2x 23 mm
#2370
2x M3x14 #1955
2x M3 #2074
#4184
#4184
6 Tail Boom
6.4 Installation
Bag 6 • Bag 12
For mounting the tail assembly in
the side-frames, pull the rear ends of
the side-frames apart.
For adjusting the gear backlash,
insert a strip of paper between the
main gear and the drive pulley, then
press the drive pulley against the
main gear.
6.5 Tail Rotor Blades
Bag 5
Tighten the screws holding the
tail rotor blades, but ensure that the
blades move easily in the tail rotor
holders under centrifugal force.