Mikado LOGO 400, Manual

Page: 11 / 54

Manual LOGO 400 Page 11 ©Mikado Modellhubschrauber
# 4189
# 4181
#2467
#2476
#2466
#4189
#4150
1x 2x10mm #2469
2x 5x10x4 #2470
2x 5x10x0.1 #2004
5 Tail Rotor
5.1 Tail Rotor Shaft
Bag 5 • Bag 10 • Bag 11
Should you have difficulty mounting
the 2x10 mm pin, carefully tap it with
a rubber hammer, or use a vice. The
5x10x4 bearings can also be moun-
ted on the rotor shaft using a vice and
tapping the shaft softly with a rubber
hammer. If the tail rotor shaft shows
axial play after closing the two halves
of the tail rotor case, use one or two
of the 5x10x0.1 washers which are
included in the bag.