Mikado LOGO 20, Manual, Page: 4 / 68

Manual LOGO 20 Page 4 ©Mikado Modellhubschrauber
Tools for Assembly & R/C Equipment
Scissors
Rubber Hammer
Drill with
1.5mm bit
(.059 in)
Marker
Screwdrivers
(plus and minus)
Hex Wrenches
1.5/2.0/2.5/3.0 mm
(.055/.079/.098/.118 in)
Radio with Heli-Software
4x Servos
Receiver Battery
(Sanyo AR500)
Battery (Sanyo RC2400 or Sanyo 3000 NiMH)
Receiver (Graupner DS 19
or SMC 19 SPCM)
Gyro (Futaba GY240
or GY401)
Fast Charger (Schulze isl 6-330d or isl 6-636+)
Motor + Speed Controller (check the Mikado
webpages for recommended motors)
Alle shown products are examples. You may use different brands.
Ball link pliers
Threadlock
Pitch Gauge