Mikado LOGO 20, Manual

Page: 2 / 68

Manual LOGO 20 Page 2 ©Mikado Modellhubschrauber
Index
All parts shown in the boxes are displayed in real size.
1 Main Frame ......................................... 5
1.1 Motorplate 5
1.2 Elevator Lever 6
1.3 Motorplate 6
1.4 Bearing Case for Main Shaft
7
2 Landing Gear ...................................... 8
3 Motor Installation ............................... 9
4 Main Gear .......................................... 10
4.1 Main Gear Hub 10
4.2 Main Rotor Shaft 11
4.3 Adjusting Gear Backlash 13
5 RC Support ....................................... 14
5.1 Battery Fixing Rings14
5.2 RC Support14
5.3 Servo Tray 15
5.4 Front Battery Fixing Rings 15
5.5 Frame 16
6 Wash-Out ........................................... 17
7 Swashplate ....................................... 18
8 Preparation for Servo Installation . 19
8.1 Servo Arms 19
8.2 Servo Centering 19
8.3 Elevator and Aileron Servos (2x) 20
8.4 Tail Servo 20
9 Aileron Lever .................................... 21
10 Control Rods .................................. 22
10.1 Length of Control Rods 22
10.2 Elevator and Aileron Linkages 22
11 Swashplate Guide Bracket ........... 24
12 Installation of Wash-Out Hub ....... 24
13 Main Frame without Rotor Head .. 25
14 Tail Rotor ......................................... 26
14.1 Tail Rotor Shaft 26
14.2 Vertical Fin 27
14.3 Tail Pitch Slider 28
14.4 Tail Rotor Lever 29
14.5 Tail Rotor Hub 30
15 Tail .................................................... 31
15.1 Tail Boom Assembly 31
15.2 Tail Boom Holder 32
15.3 Tail Drive Pulley 33
15.4 Control Rods 34
15.5 Tail Assembly 35
15.6 Tail Rotor Blades 36
15.7 Horizontal Fin 36
15.8 Tail Support 37
16 Finished Main Frame..................... 38
17 Main Rotor Head ............................ 39
17.1 Blade Grips 39
17.2 Mixing Arms 39
17.3 Yoke 40
17.4 Seesaw 41
17.5 Flybar Control Bridge 42
17.6 Flybar 43
17.7 Flybar Paddles 44
17.8 Final Assembly 45
17.9 Rotor Head Linkage 46
17.10 LOGO 20 Finished 48
18 RC Installation ................................ 49
19 Decals .............................................. 51
20 How to Avoid Interference ............ 52
21 RC Programming ........................... 53
22 Rotor Blades ................................... 60
22.1 Balancing of Rotor Blades 60
22.2 Static Balancing 60
23 Final Pre-Flight Check .................. 61
23.1 Direction of Main and Tail Rotation 61
23.2 Blade Tracking Adjustment 61
24 Control Movements ....................... 62
24.1 Pitch/Throttle 62
24.2 Rotor Head 62
24.3 Elevator 63
24.4 Aileron 63
25 Overview ......................................... 64
25.1 Chassis 64
25.2 Rotor Head 65
25.3 Tail Boom/Tail Rotor 65
26 Tuning/Accessories ....................... 66