ASSEMBLY
ASSEMBLY
TO ATTACH BATTERY
PACK (FIG. 1)
Make sure that the sander is switched
off. Align the raised rib on the battery pack
with the grooves on the sander, and then
slide the battery pack onto the sander.
NOTICE: Make sure that the latch
on the battery pack snaps into place
and the battery pack is secured to
the sander before operation.
TO DETACH BATTERY
PACK (FIG. 1)
1.
Make sure that the sander is
switched
off.
2.
Depress the battery-release
buttons
located on the front of the
battery pack
to release the battery
pack.
3.
Pull the battery pack out and
remove it
from the sander.
Release Button
Attach
Detach
FIG. 1
WARNING:
If any part is broken
or missing, DO NOT attempt to attach the
battery or operate the tool until the broken
or missing part is replaced. Failure to do
so could result in possible serious injury.
WARNING:
Do not attempt to
modify this tool or create accessories not
recommended for use with this tool. Any
such alteration or modification is misuse
and could result in a hazardous condition
leading to possible serious injury.
WARNING:
Your tool should never
be connected to the battery when you are
assembling parts, making adjustments,
installing or removing blades, cleaning, or
when it is not in use. Disconnecting the
tool will prevent accidental starting, which
could cause serious personal injury.
UNPACKING
1.
Carefully remove the tool
and any
accessories from the
carton. Make sure
that all items
listed in the packing list are
included.
2.
Inspect the tool carefully to
make sure
that no breakage or
damage occurred
during
shipping.
3.
Do not discard the packing
material
until you have
carefully inspected and
satisfactorily operated the tool.