11
TECHNICAL DATA
Power source
PILOT 200 HP
Mains voltage
1x230V ±10%
50/60 Hz
Mains fuse
Safety fuse
25 A
Automatic fuse
35 A
Efficiency
0.85
Current MMA DC
5 - 200 A
Current TIG AC/DC
5 - 200 A
Permitted load:
- at 100 % duty cycle
150 A
- at 60 % duty cycle
170 A
- at 30 % duty cycle
200 A
Open circuit voltage
92 V
TIG start
HF / LIFTIG
Slope up
0.0 - 10 secs
Slope down
0.0 - 16 secs
Gas pre-flow
0.1 - 5.0 secs
Gas post-flow
3 - 25 secs
Initial current
0 – 100 % (50%)
Final current
0 – 100 % (0%)
Pulse frequency
0.2 - 99.9 Hz (20 Hz)
Pulse balance
20 – 80 % (20 %)
Hot start MMA (c20 %)
0.0-5.0 secs (0 sec.)
1
Protection class
IP 23
2
Application class
S
Standards
EN/IEC60974-1
EN/IEC60974-10
Dimensions (W-H-L)
15x24x41 cm
Weight 7,7
kg
The numbers in brackets indicate the original
MIGATRONIC setting
1
The machine is designed for outdoor applications as it meets
the demands of protection class IP23. However, it is a
condition that the machine is placed in an upright position.
2
S
The machine meets the standards which are demanded of
machines working in areas where there is an increased risk
of electric shock
INITIAL INSTRUCTIONS
1
3
2
4
5
6
1.
Setting of welding current and other parameters
2.
Outlet for TIG torch
3.
Outlet for welding cpole
4.
Setting of slope-down
5.
Quick-release fitting for shielding gas outlet
6.
Outlet for welding current ÷pole
7
8
9
7.
Supply cable 1 x 230 V
8.
Outlet for shielding gas
9.
Main switch ON/OFF
Summary of Contents for PILOT 200 HP
Page 35: ......