- 22 -
12. Accessories List
<Table 5>
C-SPS-1-18-NG(
LP)
C-SPS-2-18-NG(
LP)
C-SPS-1-18L-NG
(LP)
C-SPS-2-18L-NG
(LP)
Adjustable
steel legs
4 pieces
6 pieces
4 pieces
6 pieces
pressure
maintaining
valve
1 piece
1 piece
1 piece
1 piece
A18 nozzle
2 piece
4 piece
2 piece
4 piece
instructions
1 piece
1 piece
1 piece
1 piece
Notice:
1、Pressure maintaining valve connects with air intake, must be installed by
authorized and licensed technicians, to ensure interface tightness.
2、The pressure regulator(s) have connected, the maximum load of natural gas
cannot exceed 6”, and of LP cannot exceed 12”.
3、Adjustment range of the pressure regulator(s) is 4”-6”for natural gas, and
7”-10”for L.P..
4、Screw the hex nut (Fig.11) before connect air intake, ensure gas mark (Fig.12)
on the plastic core whether match with connected gas source, if not, then pull
out the plastic core and change another head, insert it again. The same as
exchanging gas source.
5、When exchange gas source, use the A18 orifice (Fig.13) in the accessories.
Follow rules of 8.5.
Fig.11 Fig.12 Fig.13
Model
Qty
Name
