background image

Also Available:

* BP Series -

 

Enclosures with back panels.  Some of 

these are NEMA 4 and can be used with one of Mi-
er’s accessory heater/blowers if you only want heat. 

* Non-Metallic Series -  

NEMA 4X & UL listed 

polycarbonate enclosures (some models rated 
up to NEMA 6/6P).  These are also available with 
heater/ blowers if you only want heat. 

* Indoor DVR/CPU Lockboxes -

 

 

Indoor standard, 

tower, rack-mountable, 12RU rack-enclosure, and 
12RU rack-cart models.  All lockboxes come with 
fans and louvers for ventilation 

ATTENTION: 

  When choosing an enclosure for your application, 

careful consideration must be given in determining the heat load 
and operating temperature parameters of the electronics mounted 
within.  Also consider the conditions of the environment where 
the unit is to be mounted, and the moisture toleration of the 
electronics mounted within.  Based on these facts, the need for air-
conditioning, humidity control, heat, and/or fans can be determined 
as well as the NEMA rating needed.  (

For example, if the electronics 

cannot be exposed to moisture of any kind, a NEMA 3R fan-
ventilated unit would NOT work; you would need at least a NEMA 4 
or NEMA 4X unit.

)  Mier commonly recommends the highest NEMA 

rated and most effective Temperature Controlled units which are 
the 

“ACHT” series enclosures

.

NOTE:  To keep NEMA Rating, installers must strictly 
follow OEM installation instructions and must use water-
tight fittings on all openings.

BW-124-8-ACHT

24”W x 24”H x 8”D with an
800 BTU AC unit and 150W heater

BW-136ACHT

24”W x 36”H x 12”D with a  
2000 BTU AC unit and 500W heater

BW-124ACHT 

24”W x 24”H x 12”D with a  
2000 BTU AC unit and 500W heater

BW-RACK-8-ACHT

 

22”W x 12RU H x 24”D with an 
800 BTU AC unit, 150W heater, 
and an internal 19” rack

ACHT Series

NEMA 4 outdoor enclosures with UL Listed air-

conditioners, heaters, filters, and thermostats

Protection from Vandals and Mother Nature!

BW-242410ACHT

Polycarbonate enclosure, 
24”W x 24”H x 10”D, with a 800 
BTU AC unit and 150W heater

Add a “W” at the end of 
these part numbers for 
an optional window in 
the door.

BW-RACKACHT

 

22”W x 12RU H x 24”D with 
2000 BTU AC unit, 500W heater, 
and an internal 19” rack

Don’t see the enclosure you need?

Call or e-mail us and we’ll be happy to help!

800-473-0213  ~  [email protected] ~ www.mierproducts.com

Indoor & Outdoor Electrical Enclosures  |  Drive-Alert Vehicle Detection & Asset Protection Systems  |  Custom Fabrication

Summary of Contents for ACHT Series






Reviews: