7
Instruction Manual
Fig.2
Click
.
2 To remove the brush, first allow the appliance to cool down completely, then gently
pull on the brush (Fig.2). Note: Be careful when removing the brush as condensed hot
steam may accumulate while using it.
B. Filling the water tank (Fig.3)
.
1 Make sure that the appliance is unplugged.
.
2 Place the garment steamer on its base on a stable surface.
.
3 Remove the tank by pressing both left and right tank release buttons and pull the tank to
the outside (A).
.
4 Gently open the tank cover at the front of the tank (B).
5. Using a clean measuring cup, pour water into the opening until water reaches the
“MAX” level mark on the top of the tank (C), do not overfill. Close the rubber cover
carefully. NOTE: Using distilled, purified, or filtered water is highly recommended
and will reduce the mineral which accumulate on the heating element. Do not use
oils, perfumes, or scented additives.
6. Dry off any excess water from the tank. Push the water tank back into the garment
steamer base, a “CLICK” sound will be heard indicating proper installation.
7. To refill at any time during use, unplug from outlet, and follow the above procedure.
Fig.3
A
B
C
