manualshive.com logo in svg

Miele WWI 860 WPS, Operating Instructions Manual, Page: 71 / 112

Share
Download
Miele WWI 860 WPS Operating Instructions Manual Download Page 71

Problem solving guide

71

Fault message at the end of a programme

Issue

Cause and remedy

Align the washing
machine

The 

Pre-ironing

 extra option which runs at the end of

the programme could not be carried out properly.

Check whether the washing machine is aligned
correctly (see “Installation – Levelling the
machine”).

Check whether the maximum drain height of 1 m
has been exceeded.

If the fault message appears again, contact your Miele
dealer. The washing machine can still be used, but
without the 

Pre-ironing

 extra option.

Check jet

The pumps are soiled.

Clean the pumps as described in “Problem solving
guide – Opening the door in the event of a blocked
drain outlet and/or power failure”.

Restart the programme after cleaning.

The nozzle in the top of the door ring is blocked with
fluff.

Remove the fluff with your finger. Do not use any
sharp or pointed tools to do this.

Restart the programme after cleaning.

If the fault message appears again, contact your Miele
dealer. The washing machine can still be used but with
reduced functionality.

The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the 

OK

 sensor control.

Summary of Contents for WWI 860 WPS

















































































































Reviews:

No comments