Miele WWH 660, Operating Instructions Manual

Page: 86 / 96

Settings
86
Brightness
You can set the brightness of the
display, the sensor buttons, and the
dimmed sensor buttons.
Options
– Display
Controls the brightness of the
display.
–        (dark)
–        (light) (factory setting)
– Button lighting on
Controls the brightness of the
activated sensor buttons.
–        (dark)
–
      
(factory setting)
–
      
(light)
– Button lighting off
Controls the brightness of the sensor
buttons that can be activated.
–
      
(dark) (default setting)
–
      
(light)
Useful tip: Ensure that there is a
discernible difference in brightness
between the activated and dimmed
sensor buttons. This makes it easier to
operate the appliance.
Display switch-off
The display and the sensor button
lighting is switched off to save energy.
The
Start/Stop sensor button flashes
slowly.
Options
– On
Lighting switches off after 10
minutes.
– On (not crnt prog) (factory setting)
Lighting remains switched on
throughout the program. The lighting
switches off 10 minutes after the
program has ended.
–
Off
The lighting remains switched on.
Program info
You can select the information that will
be displayed temporarily once a
program has been selected in the
display.
Options
– Program name (factory setting)
The program name is shown in the
display for several seconds.
– Prog. nm. & max ld.
The program name and the maximum
load are shown in the display for
several seconds.
– Off
Directly after the program has been
selected, the standard display is
shown with temperature, spin speed,
and program duration.