Miele WTF 130 WPM Operating Instructions Manual Download

Page: 72 / 116

Cleaning and care

Cleaning the siphon tube and the
channel



Clean the siphon.

1. Remove the siphon from the



com-

partment and rinse under hot running
water. Clean the siphon tube at the
same time.

2. Replace the siphon.



Clean the fabric conditioner channel
with a brush and hot water.

Liquid starch results in clogging.
Frequent use of liquid starch can
cause the siphon to become
clogged.

Cleaning the detergent dispenser
drawer housing



Use a bottle brush to remove deter-
gent residues and limescale from the
jets inside the detergent dispenser
drawer housing.



Replace the detergent dispenser
drawer.

Tip:

Leave the detergent dispenser

drawer slightly open to allow it to dry.

Cleaning the drum

Washing at low temperatures and/or us-
ing liquid detergent can cause bacteria
and unpleasant odours to build up in
the washer-dryer. Use the

Maintenance

wash

programme to clean the machine.

Run this programme regularly or at the
latest when

Hygiene info

appears the dis-

play.

Summary of Contents for WTF 130 WPM





















































































































Search results

Summary of Contents for WTF 130 WPM

Reviews:

Related manuals for WTF 130 WPM

Brands by name

Popular brands

Miele WTF 130 WPM, Operating Instructions Manual

Search results

Summary of Contents for WTF 130 WPM

Reviews:

Related manuals for WTF 130 WPM

Brands by name

Popular brands