Miele WSD 663 Selection Operating Instructions Manual Download Page 32

Page: 32 / 96

6. Starting the programme

Starting a programme



Touch the flashing

Start

Add laundry

sensor control.

The door locks and the programme
starts.

If a Delay start time has been selected,
this counts down on the time display. At
the end of the Delay start time or imme-
diately after the programme has started,
the programme duration appears on the
time display.

Energy savings

After 10 minutes, the indicators dim.
The sensor control

Start

Add laundry

flashes.

To reactivate the indicators:



Touch the

Start

Add laundry

sensor

control (this does not have any effect
on a programme that is running).

Adding laundry during a pro-
gramme sequence (AddLoad)

Laundry can be added or removed at
any time, provided that the



symbol

is not illuminated on the control field.



Touch the

Start

Add laundry

sensor

control.

Rotating bars



...



...



are

shown on the time display.

If the word



appears on the time dis-

play, the door can be opened.



Open the door and add or remove
laundry.



Close the door.



Touch the

Start

Add laundry

sensor

control.

The programme will continue.

Laundry cannot usually be added or re-
moved if:

- The suds temperature is above 55 °C

- The water inside the drum is above a

certain level

Summary of Contents for WSD 663 Selection

































































































Search results

Summary of Contents for WSD 663 Selection

Reviews:

Related manuals for WSD 663 Selection

Brands by name

Popular brands

Miele WSD 663 Selection, Operating Instructions Manual

Search results

Summary of Contents for WSD 663 Selection

Reviews:

Related manuals for WSD 663 Selection

Brands by name

Popular brands