Miele WSA 023 Active Operating Instructions Manual Download Page 16

Page: 16 / 84

Before using for the first time

Running the first programme



Open the stopcock.



Turn the programme selector to the

Cottons

position.

The washing machine is now switched
on and the temperature

and spin

speed

1400

lights up.



Touch the



sensor control.

The programme will start.

After 15 minutes, the indicators dim.

Opening the door at the end of
the programme

The door remains locked during the
anti-crease phase. The indicators light
up for the first 15 minutes.



Turn the programme selector to the



position.



appears on the time display and the



indicator light goes out.

The door will unlock.

Tip:

After the anti-crease phase, the

washing machine will have switched off
and the door unlocked automatically.



Reach under the recessed grip and
pull the door open.

Tip:

Leave the door slightly open to al-

low the drum to dry.

Initial commissioning is now complete.

Summary of Contents for WSA 023 Active





















































































Search results

Summary of Contents for WSA 023 Active

Reviews:

Related manuals for WSA 023 Active

Brands by name

Popular brands

Miele WSA 023 Active, Operating Instructions Manual

Search results

Summary of Contents for WSA 023 Active

Reviews:

Related manuals for WSA 023 Active

Brands by name

Popular brands