Miele WS 5243, Operating Instructions Manual

Page: 12 / 36

Operation
Setting the local language*
(if necessary)
To set the local language the programming
mode must be accessed by pressing simulta-
neously on the "Mains on” switch and the
“Start” button. Normally German and one
other language are available.
Switch on the on-site mains switch.
Turn the key switch to position B (Oper-
ation).
Switch the machine on by pressing the
Mains off
Z
switch.
Press the Start
X
button and the Mains
on
Y
switch at the same time and keep
pressed in until the following appears in
the display:
SETTING LOCAL LANGUAGE
>DEUTSCH< ENGLISH
After selection press Start button.
Select the required language with the Cur-
sor
1 2
buttons.
- The display will immediately convert into
the language selected.
Confirm your selection by pressing the
Start
X
button.
- The complete display contents (not
visible) are converted into the language se-
lected.
Setting current time and date *
Switch the machine off with the Mains off
Z
switch.
Turn the key switch to position B.
Press the Delay start
W
button and the
Mains on
Y
button at the same time and
keep pressed in until the following ap-
pears in the display:
SETTING TIME AND DATE
Time of day
>14< : 30 hrs
Date 23. 09. 1998
After selection press Start button.
Use the Cursor
2
button to position the
cursor on the input field for hours and set
the hours with the Plus
4
or Minus
3
buttons.
Use the Cursor
2
button to position the
cursor on the input field for minutes and
set the minutes with the Plus
4
or Minus
3
buttons.
Position the Cursor on Date and use the
4
Plus
3
Minus buttons to set the date.
Position the Cursor on the month and set
the month.
Position the Cursor on the year and set
the year.
Confirm your selection by pressing the
Start
X
button.
If the “Delay start” button is pressed dur-
ing a running programme the current time
of day and date are shown.
* Pauses between programming steps must not last
longer than 25 seconds, otherwise the display returns
to the basic stage, (such as On) and the changes are
not stored in memory.
M.-Nr. 05730940 12