Changing temperaure and spin
speed
The following parameters can be changed
before the start of a program:
– the temperature in 1 °C steps from cold,
15 °C to maximum 95 °C .
– the spin speed in 100 rpm steps.
WS 5240 300 - 1100 rpm
WS 5320 300 - 1000 rpm
PROGRAMME
1
COTTONS
>60°<
Prewash
1
95 °C
Main wash
1
Rinses
3
1000 rpm
^
Use the
2
"Cursor" to position the cursor
on the input field for the Prewash tempera-
ture, and set the temperature required
(here 60 °C) with the
3 4
"Minus or Plus".
^
Position the cursor on the input field for the
Main wash temperature, and set the tem-
perature required with
3 4
""".
^
Position the cursor on the input field for the
Spin speed, and set the spin speed re-
quired with the
3 4
"Minus or Plus".
Adding detergent
^
For the standard programs add detergent
to compartment:
2
= for the main wash
1
= for the Prewash (if required)
3
= fabric softener
4
= liquid bleach
5
= liquid detergent
Detergent use
^
Only use low sudsing detergents.
^
Do not oversuds the unit with too much de-
tergent.
^
Take into account the water hardness, and
the detergent manufacturer’s instructions
when filling the dispenser.
^
Do not fill fabric softener or bleaching
agent higher than the level marker in the
relevant dispenser compartment. Other-
wise they will be siphoned into the suds
container.
^
Press
X
"Start" to begin washing.
Operation
14
