manualshive.com logo in svg

Miele WER 865 WPS Excellence, Operating Instructions Manual, Page: 4 / 120

Share
Download
Miele WER 865 WPS Excellence Operating Instructions Manual Download Page 4

Contents

4

Problem solving guide

...................................................................................... 71

The programme does not start............................................................................ 71
Fault message after a programme has been interrupted. ................................... 72
Fault message at the end of a programme ......................................................... 73
Messages or faults with the TwinDos system ..................................................... 75
General problems with the washing machine ..................................................... 77
An unsatisfactory wash result ............................................................................. 79
The door will not open......................................................................................... 80
Opening the door in the event of a blocked drain outlet and/or power cut ........ 81

Service

................................................................................................................ 83

Contact in the event of a fault ............................................................................. 83
Optional accessories........................................................................................... 83
EPREL database ................................................................................................. 83
Warranty .............................................................................................................. 83

Installation

.......................................................................................................... 84

Front view ............................................................................................................ 84
Rear view............................................................................................................. 85
Installation surface .............................................................................................. 86
Transporting the washing machine to its installation site.................................... 86
Removing the transit bars ................................................................................... 87
Fitting the transit bars ......................................................................................... 89
Levelling the machine.......................................................................................... 90

Screwing out and adjusting the feet............................................................... 90
Installing under a continuous worktop ........................................................... 91
Washer-dryer stack ........................................................................................ 91

The water protection system............................................................................... 92
Connection to the water supply .......................................................................... 94
Water drainage .................................................................................................... 96
Electrical connection  .......................................................................................... 97

Technical data

.................................................................................................... 98

Conformity declaration ........................................................................................ 99

Consumption data

............................................................................................. 100

Note for test institutes ......................................................................................... 101

Consumption data

............................................................................................. 102

Summary of Contents for WER 865 WPS Excellence

























































































































Reviews:

No comments