6. End of programme - unload the drum
27
At the end of the programme
The time display shows
0:00
. The
symbol will remain lit up in the control
panel. The door is locked in the anti-
crease phase.
Touch the
Start/Stop
sensor.
The door will unlock and the symbol
in the control panel goes out.
Pull open the door.
Remove the laundry.
Energy savings
– 10 minutes after the beginning of the
anti-crease phase, the indicators dim
and the
Start/Stop
sensor starts
flashing.
– 15 minutes after completion of the
anti-crease phase, the washing
machine switches off completely and
the door lock is released.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Check that all items have been
removed from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Turn the programme selector to the
position. This switches the washing
machine off.
If applicable, remove the used
capsule from the detergent dispenser
drawer.
Useful tip:
Leave the detergent
dispenser drawer slightly open to allow
it to dry. Close the door of the washing
machine.
