Before using for the first time
25
6. Start the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the
Cottons
programme
must
be run without laundry.
No other programmes can be started
until calibration has been carried out.
The following message will then appear
in the display:
Open the stopcock and start the Cottons
90°C programme with an empty drum
Confirm with the
OK
sensor.
The display will then change to the
standard display for the
Cottons
programme.
11:02
90 °C
1600
1:57
Cottons
h
Overview
Temperature
Spin speed
TwinDos
Extras
not selected
Whites
Timer
Save
rpm
Touch the
Start/Stop
sensor.
The calibration programme then starts.
It will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:
Set up complete
Reach under the door grip and pull
the door open.
Tip:
Leave the door slightly open to
allow the drum to dry.
Switch the washing machine off with
the
control.