Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase elec-
tricity and water consumption and may
cause the machine to move about.
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is deliv-
ered.
Unscrewing and adjusting the feet
^
Gently tip the machine and prop it up
using a solid wood wedge for exam-
ple, to ensure stability.
,
Make sure the machine does not
slip as this could cause injury.
^
Using a screwdriver loosen foot
1
to-
gether with counter nut
2
by turning it
anti-clockwise, and unscrew to the
required height.
^
Put the machine back on all four feet.
^
Use a spirit level to check the ma-
chine is standing level.
^
Hold foot
1
securely using a pipe
wrench and using a screwdriver turn
the counternut
2
clockwise until it sits
firmly up against the housing.
,
All four counternuts must sit
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Installation
51
