Miele W 5964 WPS Operating Instructions Manual Download Page 77

Page: 77 / 84

Temperature unit

You can chose for the temperature to
be displayed in

°C/Celsius

°F/Fahrenheit

The option which is currently set will
have a tick

beside it.

Buzzer

When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.

You can select one of two volumes or
switch the buzzer off.

Off

(The machine is delivered with this
option selected.)

The buzzer is switched off.

Normal

The buzzer sounds at the end of a
programme or when Rinse hold is
reached.

Loud

The buzzer sounds at maximum volume
(

Loud

) at the end of a programme or

when Rinse hold is reached.

The option which is currently set will
have a tick

beside it.

Keypad tone

An audible tone sounds each time a
button is pressed.

The machine is delivered with the
keypad tone switched off.

The option which is currently set will
have a tick

beside it.

Brightness

There are ten different display
brightness settings.

The machine is delivered with the
display brightness on setting 5.

The brightness will change as soon as
a different setting is chosen.

Contrast

There are ten different display
contrast settings.

The machine is delivered with the
display contrast on setting 5.

The contrast will change as soon as a
different setting is chosen.

Settings menu

Summary of Contents for W 5964 WPS





















































































Search results

Summary of Contents for W 5964 WPS

Reviews:

Related manuals for W 5964 WPS

Brands by name

Popular brands

Miele W 5964 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 5964 WPS

Reviews:

Related manuals for W 5964 WPS

Brands by name

Popular brands