The fitting of building-under kits*
and stacking kits* must only be
undertaken by qualified and
competent persons, in accordance
with the instructions supplied with
the kit.
Building under a continuous
worktop/in a kitchen run
If you wish to push your machine under
a worktop and there is space to do this
without removing the lid
, the
conversion kit is not necessary.
Otherwise the conversion kit is
essential.
– A special building-under conversion
kit* is required.
To ensure electrical safety, the
washing machine lid must be
replaced by the cover plate supplied
with the conversion kit.
– For installation under a work surface
900/910 mm from the floor, a raising
kit* is required.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
Fitting instructions are supplied with the
conversion kit.
All parts marked* are available from
your Dealer, the Miele Spare Parts
Department or via the internet at
www.miele-shop.com.
Washer and Dryer stack
A Miele tumble dryer can be stacked
with the washing machine. A "WTV"
stacking kit* is necessary.
Please note:
a
Safety distance to wall:
at least 2 cm
b
Height:
Stacking kit with pull-out shelf:
approx. 169 cm
Stacking kit without pull-out shelf:
approx. 170 cm
Installation and connection
65
Summary of Contents for W 5964 WPS
Page 81: ...81 ...
Page 82: ...82 ...
Page 83: ...83 ...
Page 84: ...Alteration rights reserved 0712 W 5964 WPS M Nr 09 312 510 00 ...
