Miele W 412 Operating Instructions Manual Download Page 18

Page: 18 / 68

Quick wash 40°C

Fabric

Very lightly soiled fabrics, which can be washed in the Cottons
programme.

Additional option

Water plus

Notes

–

Use less detergent (as for a half load).

–

If fabrics have a high proportion of man-made fibres it is
advisable to programme the machine for "Gentle Action". See
"Programmable functions". Note that this programme is not
suitable for delicate items.

Detergent

Powder detergent, detergent for coloured fabrics, liquid detergent

Max. load

2.5 kg

Mixed wash 40°C

Fabric

Small loads of garments made from man-made fibres and cotton
garments which can be washed together. Sort according to colour.

Additional option

Soak, Pre-wash, Intensive, Water plus

Notes

–

For heavy soiling where staining is visible, use the

Intensive

additional option.

–

If fabrics have a high proportion of man-made fibres it is
advisable to programme the machine for "Gentle Action". See
"Programmable functions".

Detergent

Powder detergent, detergent for coloured fabrics, liquid detergent

Max. load

3 kg

Starch

Fabric

Table cloths, napkins, overalls, aprons.

Notes

–

The laundry should be washed but not treated with fabric
conditioner.

Max. load

5 kg

Separate rinse

Fabric

Articles which have been washed by hand and only need to be
rinsed and spun in the machine.

Max. load

5 kg

Drain / Spin

Notes

–

Drain only: Select

Without spin

. Do not use for Woollens.

Max. load

5 kg

How to wash correctly

Summary of Contents for W 412





































































Search results

Summary of Contents for W 412

Reviews:

Related manuals for W 412

Brands by name

Popular brands

Miele W 412, Operating Instructions Manual

Search results

Summary of Contents for W 412

Reviews:

Related manuals for W 412

Brands by name

Popular brands