Miele W 3622 WPS, Operating Manual

Page: 19 / 68

You can use the extra option buttons to
augment the basic wash programmes.
Pre-wash
For laundry with large amounts of dirt
e.g. dust, sand.
Soak
For heavily soiled and stained items
with protein stains (e.g. blood, fats
and oils, cocoa).
A length of time of between 30 minutes
and 6 hours can be chosen, in 30
minute periods for the "Soak" process.
To select the soak time
^
Press the Pre-wash , Soak button
repeatedly until the Soak indicator
light comes on.
You can now use the display to select
the soak time you require.
15:06
Finish at: 17:04
Soak duration: 0.30 h
Use the – and + buttons to enter the
soak time. The display will also show
the corresponding finishing time for the
washing programme. Press the OK
button to confirm the soak time you
want.
To delete the soak time
^
Press the Pre-wash , Soak button
repeatedly until the Soak indicator
light goes out.
Short
For light to normal soiling with no
visible staining.
The duration of the main wash is
reduced.
Water plus
The machine is set at the factory so that
the water level in the main wash and
rinses will be increased if the
Water
plus
extra option is selected.
However, you can select other settings
for
Water plus . These are described in
"
Settings
menu
J
".
Buzzer
An audible tone sounds repeatedly at
the end of a programme or when Rinse
hold is reached.
The buzzer will sound repeatedly until
the machine is switched off.
Once switched on, the buzzer is active
in all programmes until it is switched off
again.
You can switch the buzzer off by
pressing the buzzer button. You can
also change the volume of the buzzer.
See "Settings menu
J
- Buzzer".
The buzzer will always sound when
there is a fault, even if it has been
switched off.
Extras
19