Miele W 3164 WSS Edition 111 Operating Instructions Manual Download Page 13

Page: 13 / 68

Control panel

Display

The display shows the programme
duration (time left).

Start button

Starts the wash programme.

Additional option buttons

Additional options can be added to
the basic programme.
Use the top button to select either

Soak

Pre-wash

, or

Short

Use the lower button to select the

Water plus

option.

Indicator light on = option selected
Indicator light off = option not
selected

Spin button

with spin speed

indicator lights
For selecting the spin speed or

(Without spin).

Programme selector

For selecting the wash programme
and temperature for that programme.
The programme selector can be
turned clockwise or anti-clockwise.

Fault indicator light

button

For switching the washing machine
on and off.
To save energy, the washing
machine will switch itself off
automatically 15 minutes after the
end of the programme/anti-crease
phase or after being switched on, if
no other selection is made.

Door button

Opens the machine door.

Operating the washing machine

Summary of Contents for W 3164 WSS Edition 111





































































Search results

Summary of Contents for W 3164 WSS Edition 111

Reviews:

Related manuals for W 3164 WSS Edition 111

Brands by name

Popular brands

Miele W 3164 WSS Edition 111, Operating Instructions Manual

Search results

Summary of Contents for W 3164 WSS Edition 111

Reviews:

Related manuals for W 3164 WSS Edition 111

Brands by name

Popular brands