manualshive.com logo in svg

Miele W 1203 WASHING MACHINE, Operating Instructions Manual

Share
Download
Miele W 1203 WASHING MACHINE Operating Instructions Manual Download Page 31

,

Repairs to electrical appliances must only be carried out by a qualified

and trained person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held responsible for unauthorized work.

The following section will help you avoid placing a service call by identifying
issues you may encounter while operating the machine:

A wash program cannot be started

Issue

Possible cause

Solution

The display stays
blank and no indicator
illuminates.

The washer has no
power.

Check to determine if:

–

the washer is plugged in.

–

the circuit breaker has
been tripped.

The "Child Lock"
indicator flashes.

The electronic lock
function is activated.

Deactivate the lock function.

The program will not
start after pressing the
"Start/Stop

T

" button.

The door is not
properly closed.

Close the drum door.

Frequently asked questions

27

Summary of Contents for W 1203 WASHING MACHINE

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands