manualshive.com logo in svg

Miele W 1203 WASHING MACHINE, Operating Instructions Manual

Share
Download
Miele W 1203 WASHING MACHINE Operating Instructions Manual Download Page 20

Cancelling a program

You can cancel a wash program any
time after a program starts.

^

Press the "Start/Stop

T

" button.

The washer drains the wash water away
and the program is cancelled.

To add or remove laundry

^

Press the "Door" button.

To select another program

^

Turn off the washer using the "On/Off"
button.

^

Turn on the washer using the "On/Off"
button.

Interrupting a program

^

Turn off the washer using the "On/Off"
button.

To continue the program

^

Turn on the washer using the "On/Off"
button.

Making changes to the
program

– A program change is not possible

after a program has started. To select
a different program, the started
program must be canceled.

– The buzzer can be turned on or off.

– A spin speed can be selected until

the final spin speed start.

No changes can be made if the
program lock is activated.

Using the washer

20

Summary of Contents for W 1203 WASHING MACHINE

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands