Delay start/SmartStart
31
SmartStart
The SmartStart function lets you
define a time period during which your
dryer will start automatically. The start
takes place via a signal, e.g., from
your energy supplier, that indicates
that the electricity tariff is particularly
economical.
This function is active when the
SmartGrid programmable function
is activated
The time period can be defined
between 30 minutes and 24 hours.
During this period, the dryer waits for
the signal from the energy supplier. If no
signal is sent during the defined period,
the dryer starts the drying program.
Setting the timeframe
If the
SmartGrid programmable
function is activated, the function of
the
sensor button changes. The
time display no longer shows the
delay start period, and instead shows
the timeframe in which your tumble
dryer can be started automatically.
The procedure for setting this is the
same as for setting the time for delay
start.
Touch the
sensor button.
Set the timeframe you want using the
or
sensor buttons.
Touch the
Start/Add laundry
sensor
button.
A flashing readout appears in the time
display for the duration:
... .
The timeframe can be ended by
opening the door.
