Miele TWR 780 WP Operating Instructions Manual Download Page 97

Page: 97 / 108

Settings

Memory

The dryer saves the settings that were
last selected for a drying programme
(drying level and/or Extras, or the
duration for some programmes).

The next time the programme is chosen
the saved settings will appear in the
display.

Options

Off

(factory default setting)

Volume

The volume can be changed for the
buzzer that sounds when the dryer is
switched on and at the end of the
programme. The volume of the tone
that sounds when a sensor is touched
can also be changed.

Options

Finish tone

Keypad tone

Welcome tone

The tones can be set to one of 7
different settings or switched off
altogether.

Display brightness

The brightness of the display can be
altered.

It can be set to one of 7 different
settings.

Factory setting: medium

Wash2Dry

You can deactivate the

Wash2Dry

function.

Options

- On (factory default setting)



Wash2Dry is enabled and lights

up in the main menu.

- Off



Wash2Dry does not light up.

Summary of Contents for TWR 780 WP













































































































Search results

Summary of Contents for TWR 780 WP

Reviews:

Related manuals for TWR 780 WP

Brands by name

Popular brands

Miele TWR 780 WP, Operating Instructions Manual

Search results

Summary of Contents for TWR 780 WP

Reviews:

Related manuals for TWR 780 WP

Brands by name

Popular brands