Miele TWJ 660 WP Operating Instructions Manual Download Page 30

Page: 30 / 100

2. Selecting a programme

Switching on the tumble dryer

The dryer is switched on by selecting a
programme, and switched off by turning
the programme selector to the



posi-

tion.



Turn the programme selector to a
programme.

When a programme is selected, the
programme name and the maximum
load (weight of dry laundry) possible
for the programme will appear in the
display for a few seconds.

Selecting a programme

There are three possible ways to select
a programme:

1. Selecting standard programmes
with the programme selector



Turn the programme selector to the
required programme.

The selected programme will be shown
in the display. The standard display will
then reappear.

Summary of Contents for TWJ 660 WP





































































































Search results

Summary of Contents for TWJ 660 WP

Reviews:

Related manuals for TWJ 660 WP

Brands by name

Popular brands

Miele TWJ 660 WP, Operating Instructions Manual

Search results

Summary of Contents for TWJ 660 WP

Reviews:

Related manuals for TWJ 660 WP

Brands by name

Popular brands